Here is some information about the tools demonstrated during today's class. This is to help you figure out what tools you may want to use for your projects. If you want a recap on how to use a machine, missed the demo, or want to use a tool that was not shown in the demo, please talk to one the lovely Art Techs.
Scroll Saw: Thin saw for cutting detailed shape, would recommend cutting thinner wood with this saw
Jigsaw: Used to cut shapes out of thicker and larger pieces of wood depending on the blade
Band Saw: Thiner bladed bandsaws work better for cutting out gentle curves from wood, there is a jig to cut straight angles, a jig to cut circles, and one of the band saws is set up to make straight cuts with a fence guide
Miter Saw: Used for straight cuts short cuts of wood, good for cutting angles and making pieces shorter
Table Saw: Good for cutting straight, long lines into larger pieces of wood (one does require special training to use this saw)
Drill Press: Drills holes into wood, good for holes that need to be perpendicular with the piece of wood
Power Drill: Drills holes into your wood (can vary the angle) and can insert/remove screws
Belt and Circular Sander: Refines the edges of a cut piece of wood
Orbital Sander: Refines flat or rounded parts of wood
Sand Paper: Good for refining details of your wood
Glue: The primary bonding agent to hold wood together. May sometimes need tape, nails, or stapes to hold the wood together while the glue is drying
Nail Gun: If tape is not enough to hold the wood together while drying and your wood pieces are thicker
Staple Gun: If tape is not enough to hold the wood together while drying and your wood pieces are thinner
No comments:
Post a Comment